HOJR 12 Circular Saw Blade 80 Tooth with Anti-Thermal Coating - Top China Suppliers and Factory for Fine Finish Cutting
⚡ Specification
| Diameter | 12”(305mm) |
| Teeth | 80 HI-ATB |
| Arbor | 1" |
| Kerf | 0.118” |
| Plate | 0.087” |
| Hook angle | 15° |
| Max RPM | 5000 |
CUTS Application Materials:
Ideal for smooth finish crosscuts in hardwood, softwood or plywood.
Ideal for smooth finish crosscuts in hardwood, softwood or plywood.
📝 Description
The HOJR thermal adhesion resistance coating saw blade redefines the cutting performance of the saw blade. The coating acts on the blade's carbide tips, its hardness is up to HV4000+. The work life of the blade can be extended more than 30 times. This coating also has excellent self-lubricating performance, which prevents resin and asphalt adhesion during wood cutting processing, as well as maintaining a balanced temperature at the tip. The coating has the minimum friction coefficient, which can get an optimal promotion on the finish of the wood surface.
⭐ Features
- Premium Specs: Dia 12in, 80 HI-ATB Tooth, kerf 0.118", plate 0.087", Arbor 1", Hook angle 15°, Max RPM: 5000.
- Advanced TA Coating: HOJR's Micro-Grain Carbide tipped blades adopt special TA coating, with no sticky chips, no heat up, and ultra long-life.
- Clean Cuts: No sticky chips, no heat, no burrs for high work efficiency.
- Extreme Durability: Long Life - Up to 30x longer lasting than regular blades.
- Thermal Protection: TA (Thermal Adhesion Resistance Coating) protects the blade tip against heat, gumming, and corrosion.
- High Accuracy: Laser-Cut Stabilizer Vents reduce noise and vibration for accuracy and durability.
- Versatile Use: Ideal for cuts in fine molding, hardwoods, softwoods, veneered plywood, melamine, and more.
📸 Product Showcase
❓ FAQ
What is the TA coating?
TA coating is the thermal adhesion resistance coating. It redefines cutting performance by providing ultra-long life (hardness up to HV4000+), self-lubrication to optimize wood surface finish, and anti-sticking properties to reduce friction and heat buildup.
Which woods are TA-coated circular saw blades suitable for?
TA-coated blades are suitable for a wide range of materials, including hardwoods, softwoods, 2x lumber, pressure-treated wood, OSB, plywood, and other general woods.
How do I properly care for my TA-coated circular saw blades?
To maintain efficiency and extend life: perform regular cleaning to remove debris, sharpen as needed, and store the blades in a suitable, dry environment.
What is the benefit of Laser-Cut Stabilizer Vents?
The laser-cut stabilizer vents are designed to trap noise and reduce vibration. This keeps the blade running cooler and truer, resulting in higher cutting accuracy and increased durability.
How much longer does the TA coating last compared to regular blades?
Due to the HV4000+ hardness and thermal resistance, these blades can last up to 30 times longer than standard uncoated carbide-tipped blades.
What is the maximum operating speed for this 12-inch blade?
The maximum recommended speed for this blade is 5000 RPM. Always ensure your saw matches this specification for safe operation.